Connection Test on GlobalPay P400 Card Reader

Created by Aubrey Francis, Modified on Sat, 12 Jul at 5:30 PM by Aubrey Francis

To run a connection Test on the Globalpay P400 Card Reader
1. Press 000
2. Use the keypad to enter the passcode, and then tap OK. The password is 9416557.
3. Tap Options, and then tap Network.
4. Tap Options, and then tap Connection Test
5. Check that both the Transport test and the Genius test pass (It will show green like below)

If you have any questions you can email ITSupport@for2020now.com

Article Updated on 07/12/2025

Note: This document and any attached materials (or program, etc.) are confidential and proprietary and constitute the sole property of 20/20 Vision Center, LLC and 20/20NOW Eye Exams, PC.. This document and any attached materials (or program, etc.) are intended solely for the recipient and no portion thereof may be reproduced, forwarded, distributed, or otherwise disclosed in any manner to any third party without the express prior written consent of 20/20 Vision Center, LLC and 20/20NOW Eye Exams, PC. © 2017 by 20/20 Vision Center, LLC. All rights reserved.