Connecting Global Pay Card Reader Power

Created by Aubrey Francis, Modified on Fri, 25 Jul at 6:42 PM by Aubrey Francis

How to connect power on GlobalPay P400 Card Reader

Out the box

Only these are needed

Step 1 Flip unit upside down and slide off back panel

Step 2 Inset plug from utility cable into device and reattach lid

Step 3 Connect power cord to utility cable and then plug into an outlet

Step 4 Unit will boot up, once its on a solid blue screen with "GlobalPayments" on it it ready to setup

If you have any questions you can email ITSupport@for2020now.com

Article Updated on 07/25/2025

Note: This document and any attached materials (or program, etc.) are confidential and proprietary and constitute the sole property of 20/20 Vision Center, LLC and 20/20NOW Eye Exams, PC.. This document and any attached materials (or program, etc.) are intended solely for the recipient and no portion thereof may be reproduced, forwarded, distributed, or otherwise disclosed in any manner to any third party without the express prior written consent of 20/20 Vision Center, LLC and 20/20NOW Eye Exams, PC. © 2017 by 20/20 Vision Center, LLC. All rights reserved.